Measurement evidence
Modulating the redox states in a 3D conductive MOF for sweat ascorbic acid monitoring · Wang W.-Q., Xie H., Cheng F. et al. · Chemical Engineering Journal · 2025 · 169190
Reported values remain attached to the sample, method, conditions, extraction quality and source location that produced them.
I2@FeTHQ, 20 C 6 h · Powder
Four-probe method on ST-2258C; comparison with 3D MOF literature
| Property | Reported value | Normalised value | Uncertainty | Origin and quality | Source |
|---|---|---|---|---|---|
| FeTHQ conductivity | 5.6 x 10-4 S cm-1 | — | — | SI Table Exact Reported | S18 · Table S2 |
| I2@FeTHQ conductivityMarked as a best value within this paper | 7.97 x 10-2 S cm-1 | — | — | SI Table Exact Reported | S18 · Table S2 |
| Conductance enhancement by iodine doping | >140-fold | — | — | Text Approximate | 4 · Results · Table S2 |
I2@FeTHQ, 20 C 6 h · Powder
PPMS-9 Hall measurement with Keithley source/nanovoltmeter
| Property | Reported value | Normalised value | Uncertainty | Origin and quality | Source |
|---|---|---|---|---|---|
| FeTHQ carrier mobility | 0.41 cm2 V-1 s-1 | — | — | Text Exact Reported | 4 · Results |
| I2@FeTHQ carrier mobility | 5.73 cm2 V-1 s-1 | — | — | Text Exact Reported | 4 · Results |
| FeTHQ resistivity | 80.97 ohm cm | — | — | Text Exact Reported | 4 · Results |
| I2@FeTHQ resistivity | 9.62 ohm cm | — | — | Text Exact Reported | 4 · Results |
| FeTHQ majority carrier type | p-type | — | — | Text Qualitative | 4 · Results |
| I2@FeTHQ majority carrier type | n-type | — | — | Text Qualitative | 4 · Results |
I2@FeTHQ/FP paper sensor · Thin Film
Electrical conductivity tracked over 0-300 bending cycles
| Property | Reported value | Normalised value | Uncertainty | Origin and quality | Source |
|---|---|---|---|---|---|
| I2@FeTHQ/FP conductivity under bending | ~5.5 x 10-3 S cm-1 stable from 0 to 300 cycles | — | — | Figure Axis Approximate | S28 · Figure S38 |