Microscopy Morphology — Anionic metal-organic framework modified separator boosting efficient Li-ion transport

4 measurement groups · 7 results

Reported values remain attached to the sample, method, conditions, extraction quality and source location that produced them.

UIOSOL@PP separator · Thin Film

Li|Cu cells with PP or UIOSOL@PP separators; initial nucleation after 0.5 mA cm-2 for 12 min, after 0.5 mAh cm-2, and after 2 mAh cm-2.

Property	Reported value	Normalised value	Uncertainty	Origin and quality	Source
Li deposition morphology with UIOSOL@PPMarked as a best value within this paper	Uniform distribution with tightly interconnected bulbs; uniform and dense island lithium deposition layer	—	—	Text Qualitative	5 · Result and discussion · Fig. 4d-f

UIOSOL@PP separator · Thin Film

Post-cycle Li electrodes from Li|Li symmetric cells with PP and UIOSOL@PP separators.

Property	Reported value	Normalised value	Uncertainty	Origin and quality	Source
Cycled Li thickness with PP separator	523 um	—	—	Text Exact Reported	5 · Result and discussion · Fig. 5d
Cycled Li thickness with UIOSOL@PP separatorMarked as a best value within this paper	507 um	—	—	Text Exact Reported	5 · Result and discussion · Fig. 5f

UIO-SOLi nanoparticles · Powder

SEM image of as-synthesised UIO-SOLi nanoparticles.

Property	Reported value	Normalised value	Uncertainty	Origin and quality	Source
UIO-SOLi morphology	Octahedral nanoparticles, same octahedral shape as UIO-66	—	—	Text Qualitative	2 · Result and discussion · Fig. 2a

UIOSOL@PP separator · Thin Film

Surface/cross-section morphology and wettability of PP and UIOSOL@PP separators.

Property	Reported value	Normalised value	Uncertainty	Origin and quality	Source
UIO-SOLi coating thickness	4 um	—	—	Text Exact Reported	3 · Result and discussion · Fig. 2f
PP contact angle	52 degrees	—	—	Figure Axis Approximate	3 · Result and discussion · Fig. 2e
UIOSOL@PP contact angleMarked as a best value within this paper	0 degrees	—	—	Figure Axis Approximate	3 · Result and discussion · Fig. 2f