Other — Catalytic Metal-Organic Framework-Functionalized Inverse-Opal Architectured Polymeric Separator for High-Performance Li-S Batteries

3 measurement groups · 12 results

Reported values remain attached to the sample, method, conditions, extraction quality and source location that produced them.

ZIF-PIO-3 separator · Thin Film

Load-displacement curves for PE, PIO and ZIF-PIO separators.

Property	Reported value	Normalised value	Uncertainty	Origin and quality	Source
PE displacement under puncture load	about 6000 nm under 2.5 mN	—	—	Text Approximate	6 · Results and Discussion · Figure S13
PIO displacement under puncture load	about 2600 nm under 2.5 mN	—	—	Text Approximate	6 · Results and Discussion · Figure S13
ZIF-PIO displacement under puncture loadMarked as a best value within this paper	about 1900 nm under 2.5 mN	—	—	Text Approximate	6 · Results and Discussion · Figure S13
ZIF-PIO irreversible deformationMarked as a best value within this paper	about 230 nm irreversible deformation	—	—	Text Approximate	6 · Results and Discussion · Figure S13
ZIF-PIO sustained-load displacementMarked as a best value within this paper	60 nm under sustained load	—	—	Text Exact Reported	6 · Results and Discussion · Figure S13

ZIF-PIO-3 separator · Thin Film

PEEK, ZIF-67, ZIF-PIO-3 and ZIF-PIO-5 under nitrogen at 10 deg C min-1.

Property	Reported value	Normalised value	Uncertainty	Origin and quality	Source
PEEK residual mass at 800 deg C	about 53.6%	—	—	Text Approximate	4 · Results and Discussion · Figure S5
ZIF-67 residual mass	about 38.1%	—	—	Text Approximate	4 · Results and Discussion · Figure S5
ZIF-67 content in ZIF-PIO-3 by mass change	5.2%	—	—	Text Rounded Reported	5 · Results and Discussion · Figure S5b
ZIF-67 content in ZIF-PIO-5 by mass change	3.9%	—	—	Text Rounded Reported	5 · Results and Discussion · Figure S5b
ZIF-67 content in ZIF-PIO-3 from TGA	about 5.6%	—	—	Text Approximate	4 · Results and Discussion · Figure S5
ZIF-67 content in ZIF-PIO-5 from TGA	3.5%	—	—	Text Rounded Reported	4 · Results and Discussion · Figure S5

ZIF-PIO-3 separator · Thin Film

Separators heated at 160 deg C for 10 min.

Property	Reported value	Normalised value	Uncertainty	Origin and quality	Source
Thermal shrinkage responseMarked as a best value within this paper	no noticeable shrinkage after 160 deg C for 10 min	—	—	Qualitative Qualitative	5 · Results and Discussion · Figure S7