Electrical Transport — Chemical sensors based on ionically conductive metal-organic frameworks for selective cadaverine detection

2 measurement groups · 5 results

Reported values remain attached to the sample, method, conditions, extraction quality and source location that produced them.

IC-CuTHPP thin-film sensor on ITO interdigital electrode · Electrode

Constant voltage of 1 V applied in a fixed direction; compared with alternating current bias behaviour.

Geometry: ITO interdigital electrode; conductive channel length 100 um and width 1000 um
Context: pristine IC-CuTHPP sensor
Measurement source: main p.3, article p.5499 · Results and discussion · Fig. 3b

Property	Reported value	Normalised value	Uncertainty	Origin and quality	Source
AC-bias current behaviour	Current did not decrease under alternating current bias	—	—	Text Qualitative	main p.3, article p.5499 · Results and discussion · Fig. 3b
DC current-time behaviour	Current continuously decreased under fixed-direction 1 V bias	—	—	Text Qualitative	main p.3, article p.5499 · Results and discussion · Fig. 3b

IC-CuTHPP 100/200/400 nm thickness series · Thin Film

Capacitance compared for 100, 200 and 400 nm CuTHPP IC-MOF films.

Geometry: Thin-film capacitive sensor
Context: pristine CuTHPP thickness series
Measurement source: main p.3, article p.5499 · Results and discussion · Fig. S3

Property	Reported value	Normalised value	Uncertainty	Origin and quality	Source
Capacitance for 100 nm CuTHPP film	1.5 nF	—	—	Text Exact Reported	main p.3, article p.5499 · Results and discussion · Fig. S3
Capacitance for 200 nm CuTHPP film	2.5 nF	—	—	Text Exact Reported	main p.3, article p.5499 · Results and discussion · Fig. S3
Capacitance for 400 nm CuTHPP film	5 nF	—	—	Text Exact Reported	main p.3, article p.5499 · Results and discussion · Fig. S3