Room-temperature chemiresistive gas sensing in a home-made dynamic sensing setup
Cu3(HHTP)(THQ) nanowire thick-film gas sensor · Thin Film
Target gas generated by certified mixtures or bubbling/drying; dry air carrier; constant flow 100 mL min-1; 5 V bias; current recorded with Keithley 2602B.
| Property | Reported value | Normalised value | Uncertainty | Origin and quality | Source |
|---|---|---|---|---|---|
| NH3 limit of detection from linear plot at 3RMS | approximately 0.35 ppm | — | 3 RMS | Text Approximate | 175 · Results and discussion · Figure 4b; Table S4 |
| NH3 theoretical limit of detection from log-log plotMarked as a best value within this paper | approximately 0.02 ppm | — | — | Text Approximate | 175 · Results and discussion · Figure 4b; Table S4 |
| Recovery time from 10 ppm NH3Marked as a best value within this paper | 2.57 min | — | — | Text Exact Reported | 174 · Results and discussion · Figure 4a; Figure S14 |
| Response time to 10 ppm NH3Marked as a best value within this paper | 1.65 min | — | — | Text Exact Reported | 174 · Results and discussion · Figure 4a; Figure S14 |
| Recovery after saturated NH3 exposure | ~88% recovery after 80 min | — | after 80 min | Text Approximate | 13 · Figure S15 caption · Figure S15 |
| Response time to saturated NH3 | 2.50 min | — | — | Text Exact Reported | 13 · Figure S15 caption · Figure S15 |
| Selectivity toward NH3 over ethanol and acetone | Good selectivity toward NH3; ethanol and acetone responses lower in Figure 4b at high concentrations | — | — | Qualitative Qualitative | 175 · Results and discussion · Figure 4b; Figures S16-S17 |
| NH3 low-concentration detection range | 1-100 ppm | — | — | Text Range | 174 · Results and discussion · Figure 4a,b |